ENGLISH

Preparation Introduction

Printing

For Your Information

Safety precautions

NOTE

Do not block the ventilation holes

Do not block the ventilation holes on the front and back of this printer.Doing so may cause heat in the printer to build up, possibly resulting in fire or electric shock.

Do not put the printer where there is poor ventilation, or on a soft surface such as a rug or bed.

Do not put the printer on an unstable surface

Do not put the printer on an unstable surface such as a shaky table. Injury may result from the printer being dropped or falling. This could also damage the printer or cause the printer to malfunction.

Do not touch the non-user-serviceable parts inside the printer Doing so may cause injury or burns. This applies especially to children and those unfamiliar with the printer.

Do not move the printer when the power cord is taut Moving the printer when the power cord is taut may damage the cord.

Using the printer when damaged may cause fire or electric shock. When moving the printer, unplug and bundle the power cord.

Do not unplug the printer by jerking or pulling on the power cord

To unplug the power cord, hold it by the plug.Pulling on the cord may damage it, possibly resulting in fire or electric shock.

Unplug the printer for servicing

Always unplug the printer before servicing or performing maintenance.

Unplug the printer if it will not be used for an extended period of time

Unplug the printer if it will not be used for an extended period of time, such as while you are away on a long trip.

Otherwise, deteriorated insulation or current leakage may cause fire or electric shock.

8