Load the digital camera.
Quietly load the digital camera into the Case, taking care that the projecting part of the zoom lever of the digital camera properly fits into the recessed part of the zoom lever of the Case.(Page 13)
CAUTION : • Confirm that the projecting part of the zoom lever of the digital camera is set securely to the zoom lever notch on the inside of the protector. When the setting is not secure, the loading of the digital camera is not complete and closing of the rear lid of the protector may not be possible or zoom does not function even when the zoom lever is operated, so that caution is required.
Set the mode dial.
After the digital camera has been loaded, push down the mode dial of the protector from the upper surface of the protector and set it so that the lower part of the mode dial of the
protector on the inside of the protector fits properly onto the upper part of the mode dial of the
digital camera.Notch Also, load the camera so that the
power switch of the digital camera fits into the power switch lever notch on the inside of the protector.
Advice • After setting the mode dial of the protector, set the power of the digital camera to 'OFF', and before sealing the protector, operate the mode dial and confirm that the mode of the digital camera is switched.