Check the loading status.

Always perform the following final checks before sealing the Case.

•Has the digital camera been loaded so that the zoom lever operates properly?

•Has the silica gel been inserted all the way at the specified position?

•Has the O-ring at the Case opening part been installed properly?

•Are the O-ring and the O-ring contact surface on the front lid free of dirt and other foreign matter?

Seal the Case.

When the rear lid is closed (quietly, so that the O-ring will not come out of the groove), the buckles are engaged with the edge of the rear lid, and the buckle lock levers are pushed down in arrow direction, the Case will be sealed airtight.

When the buckle stopper is lowered in arrow direction after the protector has been sealed, the buckle is locked and operation of the buckle opening lever becomes impossible.

CAUTION : • The buckle opening lever must be pushed down in arrow direction and the protector must be sealed.

When the buckle is not closed, the protector is not sealed and water leakage is caused.

E-19