When to charge the batteries

Charge the battery when the error message shown below appears.

Flashes in red

Battery Empty

00:34

4 14M

Monitor top left

Error message

Setting up using the supplied CD

Installation of [ib] computer software using the supplied CD is available on Windows computers only.

Windows1 Insert the supplied CD in a CD-ROM drive.

Windows XP

A “Setup” dialog will be displayed.

Windows Vista/Windows 7

An Autorun dialog will be displayed. Click “OLYMPUS Setup” to display the “Setup” dialog.

If the “Setup” dialog is not displayed, select “My Computer” (Windows XP) or “Computer” (Windows Vista/Windows 7) from the start menu. Double-click the CD-ROM (OLYMPUS Setup) icon to open the “OLYMPUS Setup” window and then double-click “Launcher.exe”.

If a “User Account Control” dialog is displayed, click “Yes” or “Continue”.

2 Register your Olympus product.

Click the “Registration” button and follow the on- screen instructions.

To register the camera must be connected to the computer. “Connecting the camera” (p. 12)

If nothing is displayed on the camera screen even after connecting the camera to the computer, the battery may be exhausted. Charge the battery and then connect the camera again.

3 Install OLYMPUS Viewer 2 and [ib] computer software.

Check the system requirements before beginning installation.

Click the “OLYMPUS Viewer 2” or “OLYMPUS ib” button and follow the on-screen instructions to install the software.

OLYMPUS Viewer 2

Operating

Windows XP (Service Pack 2 or later) /

System

Windows Vista / Windows 7

Processor

Pentium 4 1.3 GHz or better

RAM

1 GB or more (2 GB or more

recommended)

 

Free Hard

1 GB or more

Drive Space

 

Monitor

1024 x 768 pixels or more

Minimum 65,536 colors (16,770,000

Settings

colors recommended)

 

EN 13