3Move the camera slowly while keeping it straight, and stop the camera where the pointer and target mark overlap.
●The camera releases the shutter automatically.
AUTO
MANUAL
1st frame
MANUAL
1 
2
Cancel MENU | Save OK |
Cancel MENU | Save OK |
To combine only two pictures, press the A button before taking a third frame.
4Repeat Step 3 to take a third frame.
●After the third frame is taken, the camera automatically processes the frames and the combined panorama image is displayed.
To exit the panorama function without saving an image, press the button.
If the shutter does not automatically release, try [Manual] or [PC].
Taking pictures with [Manual]1Use FGHIto specify at which edge the next picture is to be connected.
Direction for combining | MANUAL | |
the next frame | ||
|
Set OK
2Press the shutter button to take the first frame. The
3Compose the next shot so that joint area 1 overlaps joint area 2.
4Press the shutter button to take the next shot.
Press the A button to combine just 2 frames.
5Repeat steps 3 and 4 to take a third frame.
●After the third frame is taken, the camera automatically processes the frames and the combined panorama image is displayed.
To exit the panorama function without saving an image, press the button.
Taking pictures with [PC]1Use FGHIto select the direction that the frames are combined.
2Press the shutter button to take the first frame, and then point the camera for the second frame. The shooting procedure is same as that of [Manual].
Panorama shooting is possible for up to 10 frames.
3Repeat Step 2 until the number of desired frames is taken, and then press the A button or button when finished.
Refer to the PC software help guide for details on how to make panorama images.