Omega CN3440 manual CableGlands N. American - 0.5in - Fig, Electrical Installation…, Information

4 ELECTRICAL INSTALLATION…

4.4.3 CableGlands (N. American – 0.5in) – Fig. 4.5

Warning.

•Controller glands must be fitted with a face seal.

•Torque settings (hubs only) – 20ft. lbs minimum, 25ft. lbs. maximum.

•Outer nuts – hand tight plus a half turn only.

Information.

•Suitable Cable Glands: (mandatory for FM installations):

O.Z. GEDNEY SR-50-375 or SR-504

APPLETON

CG 3150 or CG-3150S (and STG- 50 sealing ring).

THOMAS & BETTS 2521.

•When fitting cable glands to the controller, start with an outer gland and also temporarily fit a gland at the opposite end, to aid location of the transmitter gland plate. Fit and tighten glands consecutively from initial gland.

Alternative

Face Seal

Face
Seal
	Hub
Fittings
vary	Illustration
slightly
	typical for
for
	O.Z.Gedney
different
makes

Outer Nut

Fig. 4.5 Cable Glands

9