DBK215, pg. A-4 948894 Appendix A
System Example
DBK215 and PDQ30 Connection to a DaqBoard/3000 Series Board
Notes regarding the above system example:
1) Any of three 68-conductor SCSI ribbon cables can be used to connect the DBK215 to the board’s SCSI..
o CA-G55 is a 3-foot long cable.
o CA-G56 is a 3-foot long shielded cable.
o CA-G56-6 is a 6-foot long shielded cable.
2) Signal lines connect to the DBK215’s front panel BNC connectors or to the internal screw-terminal board.
3) When signal lines are connected to the DBK215’s terminal blocks (instead of the BNC connectors) the wires are
routed out through the upper slot of the front panel.
4) The PDQ30 analog input expansion module can be connected to a /3000 Series board’s HDMI connector. It does
not apply to DaqBoard/500 Series boards.