Omega OMG-COMM8-PCI Operating System Installation For Windows Users, Other Operating Systems

Installation

Installation

Operating System Installation

For Windows Users

Start by choosing Install Software at the beginning of the CD. Choose

Asynchronous COM: Port Software, SeaCOM.

Other Operating Systems

Refer to the appropriate section of the Serial Utilities Software.

System Installation

The OMG-COMM8-PCIcan be installed in any of the PCI expansion slots and contains a single jumper strap that must be set for proper operation. Please see the Card Setup section of the manual for information on this jumper.

1.Turn off PC power. Disconnect the power cord.

2.Remove the PC case cover.

3.Locate an available PCI slot and remove the blank metal slot cover.

4.Gently insert the OMG-COMM8-PCIinto the slot. Make sure that the adapter is seated properly.

5.Replace the screw.

6.Replace the cover.

7.Connect the power cord.

Installation is complete.

OMG-COMM8-PCI Page 4