SPINNING BRUSH DISASSEMBLY AND WASH
SPINNING BRUSH ASSEMBLY
Remove the spinning brush from strainer.
SPINNING BRUSH | SILICONE BRUSH |
| Inner |
| wing |
UP
(longer part)
Brush | Outer wing |
| |
groove |
|
Down (shorter part)
Check the groove of the spinning brush and the direction of silicone brush.
There are grooves to insert silicone brush in the spinning brush.
Silicone brush has inner wing and outer wing. 
As shown to the left, let ‘inner wing’ face the spinning brush.
|
| Detach the silicone brush from |
Spinning brush | Silicone brush | spinning brush. |
|
As shown to the left, hold the outer part of silicone brush with your fingers an pull it out to the arrow direction. It is recommended to remove it according to the above method. If pulling it by force, silicone brush may be torn or spinning brush may be damaged.
With cleaning brush, wash inside and outside of spinning brush like brushing under the running water.
Wash silicone brush in the same way under the running water.
Cleaning brush
Insert the silicone brush into the spinning brush.
According to the N o.1 above, let the longer
part of inner wing 
face upward.
Hold the outer wing 
of silicone brush with your thumb and index finger and insert the inner wing into the groove
of spinning brush.
Pull the inner wing tight enough.
Push silicone brush from the outer side of spinning brush and pull ‘inner wing’ in the direction of inside of the spinning brush with the other hand as shown to the left.
Hold the outer wing of silicone brush Pull it until you cannot pull it any longer.
If units are operating without fully assembled, there is a risk of breakage.
Hold up and down of ‘outer wing’ and pull it tight enough.
18 | 19 |
|
|
