Omega Engineering LVCN-302 specifications Displaying Your Tank’s Cross-Section, User’s Guide

omega.com® ™

®

®

LVCN-302

Set-Up Manual for Sump Model

User’s

Guide

Specifications:

MADE IN

Sensor Input: Isolated input accepts any type of 4-20 mA process signal. Loop power available up to 24VDC for 2 wire device

Input Power: 120VAC/900 mA; 24VDC unregulated/450 mA

Security Levels: 3 levels of access protect data changes with DIP switch on back

Control Circuits: Four Form C relays, 10.0 amp 125VAC (noninductive)

Switching Mode: Selectable, NO or NC states

Output & Input Connections: Terminal Connections are plug in Phoenix type

Programmed Memory: EEPROM - Loss of power will not affect existing programmed data

Mounting Format: Flush mounted anodized steel enclosure with eight (8) 10/32 studs and sealing gasket; NEMA 4 graphic front panel; steel back pan housing.

Overall Dimensions: Tall: 16.75” (425 mm), Wide: 10.25” (250mm), Deep 2.25” (57mm),

Weight: 4.5 kg (10 lbs.)

LVCN-302 is a solid-state controller with a variety of unique control and display features. It’s designed to simply present the crucial information, at a glance. It’s built to perform in all types of harsh industrial environments as well as control alarms, pumps, solenoids, etc.

Topics covered in this manual

Displaying Your Tank’s Cross-Section

Security Levels / Select and Enter Data

Initial Set-Up / Eight Simple Steps

Sensor Connections / Schematics

Sending a 4-20 mA Signal to Other Devices

M3760/1201