ASSEMBLY INSTRUCTIONS

Omron Clock Aneroid (all models):

1.Attach one end of the coiled tube (the end without the metal connector) to the connector on the underside of the Omron Aneroid (Figure 2).

2.Attach the other end of the coiled tube (the end with

the metal connector) to the tube from the cuff and bladder (the tube without the bulb assembly).

3.The cuff and bladder assembly can be stored in the basket on the back of the aneroid. Once mounted to the wall or affixed to a floor stand, the Omron Aneroid is ready for use.

Connector

Figure 2

Wall-Mount (for models 11-675D and 11-675DNL):

1.Hold wall-mount plate against the wall at the desired location and mark the position of the mounting holes for drilling. Drill four (4) holes and insert the metal wall anchors. Attach the wall-mount plate to the wall by using the four metal (4) screws (Figure 3).

2.Loosen wing nut on the bottom of the Aneroid and adjust the unit to the desired angle. Tighten wing nut and slide the wall bracket into the wall-mount plate (Figure 4).

3. The wall-mounted Omron Aneroid

Figure 4

 

is now ready for use.

 

Figure 3

ASSEMBLY INSTRUCTIONS

Cuff

Figure 5

140

160

180

120

 

220

100

 

240

80240

60

SPHYGMOMANOMETER

260

CERTIFIED

40280

20 300

mmHg

MADE IN JAPAN

Coiled Tube

Air Release Valve

Bulb

4

5