Press the button to move down the list, and the button to move up.
The most recent measurement result is displayed at the top of the list and is automatically highlighted,
with any previous measurement results listed below it in chronological order.
When the SD memory card is in the SD memory card slot, the list of ECG data stored on the card is
displayed.
If there is no SD memory card in the card slot, the ECG data stored in unit memory is displayed.
3.If you press the button, you can scroll through the ECG
waveform measurement.
Press the button to return to the previous waveform display.
Two waveforms are displayed (the lower, smaller, waveform being a
view of the whole 30-second measurement.)
At the bottom of the screen is a bar with shaded area which indicates the
section of the ECG waveform displayed.
The heart rate is shown in the lower right corner of the screen.
4.Press the SELECT button again to view the data description messages
and heart rate.
NOTE:You can specify whether a data description message is displayed
or not. Refer to page 39 for details.
5.Press the SELECT button once more to return to the GRAPH menu list.
HOW TO DISPLAY ECG DATA31