2. Preparation
Notes on Adjusting the Date and Time Setting
If you need to adjust the date and time for some reason, or if the date and time has been reset after replacing the batteries, adjust the date and time between 10:00 and 18:59. This will avoid problems with morning and evening weekly averages stored in memory.
To adjust the date or time at a later stage, start the unit in the off position. Follow the steps below.
1.
2.
Press and hold the SET button.
The auto mode symbol 
and the current setting (on or oFF) will appear on the display for the user ID selected.
If the year is not flashing, press the SET button once or twice until the year is flashing.
The year flashes on the display.
Refer to Chapter 2.2.2 to start setting the date and time.
With this manual setting of date and time the unit needs to be manually shut off. It will not automatically turn off after the minutes have been set.
14
