2. Preparation
Adjusting the Date and Time Setting
Note: If you need to change the date and time for some reason, or if the date and time has been reset after replacing the batteries, adjust the date and time between 10:00 and 18:59. This will avoid problems with morning and evening weekly averages stored in the memory.
1.Press the O/I button to turn the power off.
2.Turn the unit on then press
and hold the MEMORY button for three seconds or longer when the standby display (shown right) appears.
Standby display
(When the arm cuff is closed.)
3.The year setting flashes on
the display.
Refer to Chapter 2.3 to adjust the settings for the date and time.
18
