4. Handling Errors and Problems

4.2Troubleshooting

Problem

Cause

Remedy

 

Is your arm placed

Refer to Chapter 3.2.

 

through the arm cuff

 

correctly?

 

 

 

Keep quiet during

 

Talking during the

measurement.

 

Carefully read and repeat

 

measurement.

 

the steps listed under

The reading is

 

 

Chapter 3.3.

extremely high (or low).

 

Carefully read and repeat

 

Are rolled up sleeves

 

the steps listed under

 

squeezing the arm?

 

Chapter 3.3.

 

 

 

Is the cuff lining in the

Cancel the measurement

 

and contact your

 

arm cuff damaged?

OMRON distributor or

 

 

Customer Services.

 

Is air leaking from the

Contact your OMRON

Cuff is not inflated.

distributor or Customer

arm cuff?

 

Services.

 

 

The unit operates normally and measurements

 

appear to be taken, but...

 

 

• Measurements taken by a doctor are higher (or

Refer to Chapter 7.

lower).

 

EN

• Measurement results are different each time.

 

Power is turned off

 

 

during measurement.

The batteries are empty.

Replace the batteries.

The date and time are

(Refer to Chapter 2.1.)

 

reset.

 

 

 

 

The backlight does not

The backlight does not

The AC adapter is not

light when using only the

batteries.

light.

connected.

Connect the AC adapter.

 

 

 

 

(Refer to Chapter 2.2.)

41

Page 41
Image 41
Omron i-Q132 instruction manual Troubleshooting, Problem Cause Remedy