Omron NE-C30-E instruction manual Handling the Vaporiser Head

Models: NE-C30-E

1 36
Download 36 pages 14.52 Kb
Page 21
Image 21
Vaporiser head

5. Cleaning and daily disinfecting

Handling the Vaporiser Head

The vaporiser head is an important part that is used to vaporise medication. Be sure to observe the following precautions when handling it.

Caution:

 

• Always wash the vaporiser head after each

Baffle

use. Failure to do so could cause blockages

 

and a deterioration in your condition due to a

 

failure to vaporise medication effectively.

 

• Do not use a brush or pin etc., to clean the parts. This could damage the baffle and cause a deterioration in your condition due to a fail- ure to vaporise medication effectively.

When disinfecting the parts by boiling, be sure to boil them in plenty of water. If there is insufficient water, the parts could become dis-

torted due to the high temperature near the bottom of the pan. Distorted parts could

cause a deterioration in your condition due to a failure to vaporise medi- cation effectively.

Do not boil vaporiser head together with other objects, other than appli- cable nebuliser accessories. This could damage the baffle and cause a deterioration in your condition due to a failure to vaporise medication effectively.

Do not use a microwave oven, dish dryer or hair dryer to dry parts. The parts could become distorted due to the high temperature and cause a deterioration in your condition due to a failure to vaporise medication effectively.

EN

21

Page 21
Image 21
Omron NE-C30-E instruction manual Handling the Vaporiser Head