4. Cleaning and daily disinfecting
4.1Cleaning
Following the cleaning instructions after each use will prevent any remaining medication in the tank from drying, resulting in the device not nebulising effectively and also for preventing infections.
Warning:
Thoroughly rinse the nebuliser kit, kids accessory, mask or mouthpiece with clean hot tap water after each use, and disinfect them after the last treatment of the day.
1.Make sure that the power switch is in the off ( 
) position.
2.Disconnect the AC adapter from the wall outlet and the compressor.
3.Remove the nebuliser kit from the air tube and disassemble the nebuliser kit. Refer to Section 2 (page
4. Discard any remaining medication in the medication tank.
5.Wash all the nebulising parts in warm water and mild detergent and rinse in clean hot tap water.
6. After cleaning and disinfecting the parts, rinse them thoroughly with clean water and allow the parts to air dry in a clean environment.
Note: Do not start operation before the cleaned parts are completely dried.
7.If the compressor or the outside of the air tube are dirty, wipe them clean with a soft cloth moistened with water or mild detergent.
Caution:
The compressor is not waterproof.
Mild Detergent
8.Reassemble the nebuliser kit. Put it in the storage bag.
16
