Omron NE- C801KD Note If the amount of aerosol is too small, it is not necessary to place the cap

Models: NE- C801KD

1 26
Download 26 pages 50.75 Kb
Page 13
Image 13
Note: If the amount of aerosol is too small, it is not necessary to place the cap.

2.Preparing the nebuliser for use

6. Attach the cap, kids accessory, mask or mouthpiece to the nebuliser kit.

1) Attach the cap to the inhalation air inlet.

2) Attach the kids accessory to the inhalation top.

3) Attach the mask or mouthpiece to the inhalation top.

Note: If the amount of aerosol is too small, it is not necessary to place the cap.

7.Attach the air tube.

1)Twist the air tube plug slightly and push it firmly into the air tube connector on the compressor.

2)Twist the air tube plug slightly and push it firmly into the air tube connector on the medication tank.

Notes:

Make sure that the air tube is securely attached to the compressor and nebuliser kit, and does not come loose. Twist the air tube plug slightly when inserting it into the air tube connectors to avoid the air tube disconnecting during use.

Take care not to spill the medication when attaching the air tube. Keep the nebuliser kit upright.

EN

13

Page 13
Image 13
Omron NE- C801KD instruction manual Note If the amount of aerosol is too small, it is not necessary to place the cap