Sealed Tilt Switch
D7E
•Pure mechanical vibration detector
•Sealed enclosure
•Output capacity from 0.1 A at 5 VDC to 100 A at 30 VDC
•RoHS Compliant
Ordering Information
Operating Angle
50 to 80 degrees
Model
Characteristics
Operating angle | Tilt of 50 to 80 degrees | |
|
|
|
|
| The value of tilt degree is specified when the switch is tilted gradually (approx. 1 degree/s) from the horizontal. |
|
| |
Returning angle | Tilt of more than 25 degrees. | |
|
| The value of tilt degree is specified when the switch is tilted gradually (approx. 1 degree/s) from the horizontal. |
|
| |
Permissible mounting level | 1 degree max. from the horizontal | |
|
| |
Contact form | Single pole single throw (NC contact / slow action) | |
|
| |
Mounting | Pitch: 30 mm 2 screws (M3) | |
|
|
|
|
| Height: 5.3mm |
|
| |
Soldering | Soldering iron: temperature 350 ±10°, 3 sec. max | |
|
| |
Ratings | 5 VDC, 0.1 mA to 30 VDC, 100 mA (resistive load) | |
|
| |
Insulation resistance | 100 MΩ min. (250 VDC, between each terminal of the same polarity) | |
|
| To measure off condition |
|
| |
Contact resistance | 300 m Ohm max. (Initial value) | |
|
| |
Vibration during | Condition: Vibration: 200 gal (1 cycle: 0.5 sec.) | |
transportation | Vibration direction: 2 axial directions | |
|
| |
|
| Time: Total 50 hours |
|
| |
Shock | Condition: Acceleration: 980 m/s2 3 times | |
|
| Shock direction: 3 axial directions |
|
| |
Operating temperature and | Temperature: | |
humidity | Humidity: 45 to 95% RH | |
|
| |
|
| |
Storage temperature and | Temperature: | |
humidity | Humidity: 45 to 95% RH protection | |
|
| |
|
| |
Protection | IP67 | |
|
|
|
70Sealed Tilt Switch D7E
