SETTING PERSONAL DATA
To measure Body Composition, your personal data must be set. Your personal data includes your age, gender and height. The Body Composition Monitor with SCALE provides two options to enter your personal data.
1)Select a personal profile number to save your personal data. The monitor saves up to 4 personal profiles. Select a number 1 through 4. Use this number to enter your personal data and when taking a measurement.
2)Select Guest/Memory button if you do not want your personal data stored in the memory. When you use the Guest option you will need to enter your personal data each time you take a measurement. Measurement results are not stored in the memory when the Guest option is used to take a measurement.
Buttons Used in this Procedure
Personal Profile Number Button 
SET Button
Use this button to confirm the personal data or move to the next item after confirming the set item.
PressDOWNthis buttonButtonto go back one. Press continuously to rapidly decrease.
Personal Profile Number Button
UP Button
Press this button to advance one. Press continuously to rapidly advance.
1. Press the Power Switch to turn the monitor ON.
The CAL symbol blinks on the display, then the display changes to 0.0 lb.
Wait until 0.0 lb appears on the display.
2. Lift the Display Unit out of the Display Unit Holder.
NOTE: This monitor can be set to either the US or Metric System. Personal Profile and memory will be displayed by selected system. To change the US/Metric mode:
1) Press and hold the 
UP button until “lb” and “kg” blink on the display.
2)Press the 
UP or 
DOWN button to select the mode, “lb” or “kg”.
3)Press the SET button to confirm the change.
22
