HOW TO MEASURE WEIGHT ONLY
1. Press the Power Switch to turn the monitor ON.
The CAL symbol blinks on the display, then the display changes to 0.0 lb.
Wait until 0.0 lb appears on the display.
NOTES:
• If you step onto the monitor before 0.0 lb appears on the display, an error message “Err” will appear.
• This monitor can be set to either the US or Metric System. Personal Profile and results will be displayed by selected system. To change the US/Metric mode:
1) Keep the 
DOWN button pressed until “lb” and “kg” blink on the display.
2)Press the 
DOWN button to select the desired measurement unit, “lb” or “kg”. This will automatically change “cm” and “feet/inch” under height setting.
3)Press the SET/MODE button to confirm the change.
2.Step onto the Measurement Platform.
Stand with your weight evenly distributed on the measurement platform.
Remain still and do not move until the measurement is complete.
3.Check the measurement result.
The display will show your weight and then the weight result will blink twice.
4.Step off the Measurement Platform.
5.Press the Power Switch to turn the monitor off.
28
