FRAME ASSEMBLY
7.Press a Weight Tube Bumper (64) into the end of the Short Weight Tube (108). Insert the Weight Tube into the front stack of Weights (25). Be sure that the pin on the Weight
Tube is sitting in the pin grooves in the top Weight.
Lubricate the inside of the holes in a Top Weight (65). Set the Top Weight onto the front stack of Weights (25). Insert both Long Weight Guides (62) into the stack of Weights. Be sure that the holes in the Weight Guides are at the top, as shown.
8. Press a Weight Tube Bumper (64) into the |
end of the Long Weight Tube (63). Insert the |
Weight Tube into the rear stack of Weights |
(25). Be sure that the pin on the Weight |
Tube is sitting in the pin grooves in the top |
Weight. |
Lubricate the inside of the holes in the other |
Top Weight (65). Set the Top Weight onto the |
rear stack of Weights (25). Insert both Short |
Weight Guides (73) into the stack of Weights. |
Be sure that the holes in the Weight |
7
8
Holes
62
65 |
Lubricate |
Pin |
108 |
64 |
Pin Grooves
25 |
Holes
73
Guides are at the top, as shown. |
Lubricate |
65 |
Pin |
63 |
64
Pin Grooves
25
7
