15. See the inset drawing. Attach the Military |
Press Arm (84) to the Pivot Arm (101) with |
two 5/16” x 2 1/4” Bolts (33) and two 5/16” |
Nylon Locknuts (3). |
Press two 1 1/2” Square Inner Caps (32) into |
the Military Press Arm (84). Press two 1” |
Round Inner Caps (49) into the Military Press |
Arm. Slide two 5” Plastic Handgrips (83) onto |
15 | 32 |
49
32 |
21
84
the Military Press Arm. |
Attach the Pivot Arm (101) to the Assist |
Upright (74) with a 3/8” x 3 1/4” Bolt (67) and |
101
67
83
ASSEMBLY
a 3/8” Nylon Locknut (21). |
74 | 56 |
33 |
101 |
84 |
3
ARM
16.Press two 1” x 2” Inner Caps (107) into the Assist Arm (105).
Attach the Assist Arm (105) to the Leg Press Upright (56) with a 3/8” x 6” Bolt (106), two 3/8” Flat Washers (9), and a 3/8” Nylon Locknut (21). See the inset drawing. The
Assist Arm must be attached to the lowest hole in the Leg Press Upright (56). The Assist Arm must also be below the welded bracket on the Assist Upright (74).
16
74
Bracket
105
74 
56
56
106107
9 
9
105 | 21 |
10
