CABLE ASSEMBLY
20.Wrap the High Cable (58) around a
Long Cable Trap is positioned to hold the Cable in place.
21.Route the High Cable (58) around the “V”- Pulley (50) on the Left Arm (47). Be sure that the Cable is in the groove of the Pulley and that the Long Cable Trap (31) is posi- tioned to hold the Cable in place. Tighten the 3/8” x 2 1/2” Bolt (86) and the 3/8” Nylon Locknut (not shown).
22.Route the High Cable (58) around the “V”- Pulley (50) on the Right Arm (48). Be sure that the Cable is in the groove of the “V”- Pulley and that the Long Cable Trap (31) is turned to hold the Cable in place. Tighten the 3/8” x 2 1/2” Bolt (86) and the 3/8” Nylon Locknut (not shown).
23.Attach the Pulley Bracket (20) to the Top Frame (55) with the 5/16” x 5” Bolt (68) and a 5/16” Nylon Locknut (3). Do not overtighten the Nylon Locknut; the Pulley Bracket must be able to move freely.
See the inset drawing. Route the High Cable (58) around the 3 1/2” Pulley (15) attached to the Pulley Bracket (20). Tighten the 3/8” x 2” Bolt (12) and a 3/8” Nylon Locknut (not shown). Be sure that the Cable is in the groove of the Pulley and that the Cable Trap (66) is turned to hold the Cable in place.
20
86
31
58
50
Bracket |
42 |
21 |
21
86 31
50
58
47
22
31 86 50
58
48
23 |
|
| 68 |
|
|
| |
| 55 |
| 66 |
|
|
| |
20 |
|
| 12 |
|
|
| |
|
| 3 | 15 |
|
|
| |
|
|
| 58 |
12
