Weider 831.159380 user manual Rect the problem. Important If the cables

	47. Press two 3/4” Round Inner Caps (34) into
ASSEMBLY	each Pad Tube (28).
	Lever (29). Slide a Foam Foam Pad (30) onto
	Insert a Pad Tube (28) into the Front Seat
	Frame (36). Slide a Foam Pad (30) onto each
	end of the Pad Tube.
SEAT	Insert the other Pad Tube (28) into the Leg
	each end of the Pad Tube.
	48. Remove the backing from the PRO 9645
	decal and apply it to the home gym system as
	shown.
	Make sure that all parts have been properly
	tightened. The use of the remaining parts will
	be explained in HOW TO USE THE HOME
	GYM SYSTEM, beginning on page 22 of this
	manual.
	Before using the home gym system, pull each
	cable a few times to be sure that the cables
DECAL	move smoothly over the pulleys. If one of the
	cables does not move smoothly, find and cor-
	rect the problem. IMPORTANT: If the cables
	are not properly installed, they may be
	damaged when heavy weight is used. See

the CABLE DIAGRAMS on pages 26 and 27 of this manual for proper cable routing. If there is any slack in the cables, you will need to remove it by tightening the cables. See TROUBLE-SHOOTING AND MAINTE- NANCE on page 25.

47

36

30

34 28

34

30

29

48

PRO 9645

21