Weider 831.159380 user manual Seat, Assembly

43.Attach the Front Backrest (41) to the Front Upright (42) with two 1/4” x 2 1/2” Screws (43) and two 1/4” Flat Washers (10). The Backrest must be oriented as shown.

44. Press a 1 1/2” Square Inner Cap (32) into the

Front Seat Frame (36).

Insert a 1/4” x 2” Carriage Bolt (38) through

the center hole in the Seat Plate (37). Attach

the Seat Plate to the Seat (13) with two 1/4” x

1/2” Screws (18).

Insert the 1/4” x 2” Carriage Bolt (38) through

the indicated hole in the Front Seat Frame

(36). Tighten a 1/4” Nylon Locknut (2) with a

1/4” Flat Washer (10) onto the Carriage Bolt.

43 42

41

43 10

Thick

End

44

13

38

37

18 32

ASSEMBLY

Attach the other end of the Seat (13) to the

Front Seat Frame (36) with a 1/4” Flat Washer

(10) and a 1/4” x 2” Machine Screw (81).

45. Press a 1 1/2” Square Inner Cap (32) into the

Leg Lever (29).

81 10

45

36

2

SEAT

Lubricate the 5/16” x 2 1/4” Bolt (33). Attach

the Leg Lever (29) to the Front Seat Frame

(36) with the Bolt and a 5/16” Nylon Locknut

(3).

Insert the 5/16” x 2” Eyebolt (35) into the Leg Lever (29) from the direction shown. Tighten a 5/16” Nylon Locknut (3) with a 5/16” Flat Washer (8) onto the Eyebolt.

46.Rest the Front Seat Frame (36) on the indicat- ed pin in the Front Upright (42). Attach the Front Seat Frame to the Front Upright with a 5/16” x 2 3/4” Carriage Bolt (14) and the Seat Knob (40).

36

										3
	Lubricate—33
								29
								8
			35
											3
				32
46
					42
				40
				36
		14

Pin

20