HOW TO TAKE MEASUREMENT
Changing Scale Between (C°) and (F°).
The Thermometer can display temperature in either Centigrade or Fahrenheit. To change the scale, follow the instructions below:
1.Start with the thermometer turned off.
2.Simultaneously, press and hold the mode and the on/off buttons until a “Beep” is heard. Release buttons after the beep. The display will first show the previously used scale and then the new one.
3.When the “hourglass” symbol disappears, the thermometer is ready to measure by the selected measurement scale.
NOTE: If thermometer is turned off before a measurement is taken after the scale
change, the scale will revert to the one last used.
Operation in a Warm Environment
In a warm environment (ambient temperature over 34°C / 93.2°F), the thermometer may measure in a different operation mode (monitoring mode). In that case, please follow the instruction below.
1.Following the thermometer premeasurement preparation if you see a temperature value on the display, instead of a running circle, the thermometer is operating in the monitoring mode.
2.The “body site” icon and the “C° or F°” indicator will begin to blink and a short beep will be heard every 10 seconds to indicate that the measurement is in progress.
3.When a long beep is heard, the process is complete and the temperature will be displayed in “C” or “F”.
NOTE: A measurement by the monitoring mode typically takes 2 minutes.
10
