1
2
3b
3a
3.Press the CH ^ key once per second until the TV turns off.
4.When the TV turns off, press ON/OFF key.
If the TV turns on:
press MUTE to save the TV code.
If the TV does not turn on:
press CH v to go to the previous TV code and press MUTE to save once the TV turns on.
NOTE: There are over 200 possible codes, so the code search may take a few minutes.
Reprogramming Favorite Channel Keys
The Kid’s Remote comes
CAUTION: This will program over the channel that was
To program a favorite channel:
1.While in Programming mode, press and hold the key that you wish to assign a favorite channel. The LED blinks twice. Release the key.
2.Press the digits for the channel number for the favorite channel that you wish to add.
3.Press and hold the key that you wish to assign again until the LED blinks twice.
4.Repeat steps above to assign another favorite channel.
If the LED flashes one long blink, the entry failed and must be repeated.
Note: The Kid’s Remote package comes with stickers you can use to place over any keys you’ve reprogrammed. Label the sticker first; then peel it off the sheet and place it on top of the key.
Changing Power Control Settings
The ON/OFF key has a default setting to control power on both the DIRECTV receiver (or cable box if reprogrammed) and TV each time it is pressed. To change this power control setting:
1.In CHILD or ADULT mode, hold down both MUTE and ON/OFF for three seconds, until the LED blinks twice.
2.Enter 9 9 5. The LED blinks twice.
3.Press ON/OFF.
4.Decide what you want the ON/OFF key to turn on and off and in what order. Then press the correct key from the following chart.
ON/OFF turns on/off... | ...press: |
satellite receiver and TV | 0 |
(satellite receiver first) |
|
satellite receiver and TV (TV | 1 |
first) |
|
satellite receiver only | 2 |
TV only | 3 |
5. Press and hold MUTE until the LED blinks twice.
