One for All URC-3720 Direct code set up, Example To set up the ONE for ALL 2 for your television

Direct code set up

Example: To set up the ONE FOR ALL 2 for your television:

1

	0512	0037	0554	0191
	0361	0349	0505	0010
Bazin	0217
Beko	0370	0486 0037		0606
Bennett	0556	0037
Beon	0037	0418 0032
Best	0337	0370	0421
Bestar	0037	0370	0374
Binatone	0217
Black Star	0247
Blacktron	0282
Blackway	0282
Blaupunkt	0554	0191	0535	0195
	0200	0213	0327	0328
	0318	0448

Find the code for your device (e.g. Bennett Television) in the Code list (page 144 - 155 in the manual). Codes are listed by device type and brand name. The most popular code is listed first.

Make sure your device is switched on (not on standby).

2Press the TV key on the ONE FOR ALL 2 to select the device you wish to Set-Up.

3Press and hold down the MAGIC key (for approximately 3 seconds) until the red LED (underneath the TV key

in this example) blinks twice.	x2
The red LED will blink once, then twice.

4

5

_ _ _ _

Enter your four-digit device code using the number keys (e.g. Bennett code 0556). The red LED will blink twice to confirm that the code is stored.

Now, aim the ONE FOR ALL 2 at your device and press OFF. If your device switches off, the ONE FOR ALL 2 is ready to operate your device.

6.	Next, switch your device back on (pressing ON, a
	number key or CH+) and try all the remote’s
	functions to ensure they are working properly.
	If the functions do not work properly, repeat steps 1-5
	using another code listed under your brand.

-If your device does not respond, follow steps 1 to 5 with each code listed for your brand. If none of the codes listed for your brand operate your device OR if you your brand is not listed at all, try the search method described on page 9.

-Some codes are quite similar. If your device does not respond or is not functioning properly with one of the codes, try another code listed under your brand.

-Remember to press the correct device key before operating your device. Only one device can be assigned to a device mode. If your original remote operates more than one device, you need to set up each device separately.

8 WWW.ONEFORALL.COM