Important notes:
-To set up your Video Recorder, Satellite Receiver or Cable Converter, follow the same instructions above, only press the VCR or SAT key during step 2.
-Some codes are quite similar. If your device does not respond or is not functioning properly with one of the codes, follow steps
-If none of the codes listed for your brand operate your device, follow the Search Method described in the next section. The Search Method can be used even if your brand is not listed at all.
-Remember, to control your device after you have programmed it with the ZAPPER, you must press the device key first (TV, VCR or SAT).
TV Code
VCR Code
SAT/Cable Code
■ ■ ■ ■ ■
■ ■ ■ ■ ■
■ ■ ■ ■ ■
Programme + = 3
Volume - = 2 | Volume + = 1 |
Programme - = 4
(Example: To enter the Sony TV code 24432, you would press
If your device does not respond to the ZAPPER after you have tried all the codes listed for your brand, try the Search Method.
Make sure you write your correct 5 digit codes in the boxes provided inside the battery compartment and on this page.
WWW.ONEFORALL.COM | 7 |
