WWW.ONEFORALL.COM 9
Code Blink Out
After you have used the Search Method, you can find out which code the
ZAPPERresponded to by blinking back the code. It’s useful to know your
Television, Video, Satellite Receiver or Cable Converter code for future refe-
rence. Remember, you can only blink back your code after the ZAP-
PER is operating your device.
To blink out your TV code:
1Press the TVkey on the ZAPPER.
2Press and hold the MAGIC key until the red light
blinks twice(it will blink once then twice).
3Next, press Programme(-), Programme(-),
Programme(+).
4For the first digit of your 5-digit code, press Volume + ( )
and count all the red blinks.
5For the second digit, press Volume - ( ) and count all
the red blinks.
6For the third digit, press Programme(+) and count all
the red blinks.
7For the fourth digit, press Programme(-)and count all
the red blinks.
8For the fifth digit, press MUTEand count all the red blinks.
Now you have your 5-digit code. Write your code in the boxes provided
previously and inside the battery compartment for easy, future reference.
Important note:To blink out the code for your Video Recorder, Satellite
Receiver or Cable Converter, follow the same instructions above, only press
the VCR or SAT key during step 1.
TV