One for All URC-7525 warranty Shifted mode Magic = Shift, Changing Key Groups

Shifted mode (MAGIC = Shift)

If a key group controls one device, it does not mean that you cannot access that function for your other device. For example, pressing the Menu key will send the Menu function for your Set Top Box. But once in a while you may want to con- trol the Menu of your TV (for example to change colour or brightness). This function is available as a “Shifted” function. To access a shifted function, press and release the Magic key, followed by the function you require (in this case Menu) within ten seconds.

-Pressing no key for ten seconds will mean that the remote returns to the “non-shifted” state.

-When in shifted mode, once you pressed the function key the remote will remain in shifted mode for another 10 seconds.

If a key group is assigned to one device, the alternate device’s function is auto- matically shifted. So for example, if the Volume keys are assigned to TV, the Set Top Box’s Volume controls are accessible by the shifted method above.

If you would like to change which Key Group is assigned to which device, this can be easily accomplished by following the steps on page 8 - 9.

Changing Key Groups

As shown in the table on page 7, key groups are assigned by default to either TV or Set-Top-Box (STB). If you choose, you can change which Device a Key Group is assigned to. For example, you may want the Fastext Key Group (Red, Green, Yellow and Blue) to control your TV and not your Set Top Box.

If you wish to change the device controlled by a Key Group, first you will need to find out what the “representative” key is for that particular Key Group. In this example, the representative key for the Fastext Key Group is the Red key. The list of representative keys is shown below:

Key Group Name	Representative Key
Power	Power
Text Controls	Text On
16:9	16:9
Digits	-/--
AV	AV
Volume Controls	Volume Up
Channel Controls	Channel Up
Menu Controls	Menu
Fastext Keys	Red
Digifunctions	Guide

To change which device a Key Group controls:

Example: changing the “Fastext Keys” (represented by the Red Key – see table above) from “Set-Top-Box, Digital Satellite, Cable Box” control into Television, LCD-TV, Plasma-TV control :

1Press and hold the MAGIC key until the red light (LED underneath the TV Icon) blinks twice (the red LED will light up once then twice).

2Press the representative key of the group you want to change (in this example, the Red key).

8 WWW.ONEFORALL.COM