One for All URC-7525 warranty Set Up, Search Method, Example to search for your Television code

Set Up

Search Method

--> If your device does not respond to the ONE FOR ALL after you have tried all the codes listed for your brand.

--> If your brand is not listed at all.

The Search Method allows you to scan through all the codes contained in the memory of the ONE FOR ALL.

Example: to search for your Television code:

1Switch your television on (not on standby).

2Press and hold the MAGIC key until the red light (LED underneath the POWER) blinks twice. The LED will light up once then twice.

3In this example press 9 9 1 to search for your Television, LCD-TV, Plasma-TV.

4	Next, press POWER.
5	Aim the ONE FOR ALL at your Television. Now press CH+ over
	and over, until your Television turns off (every time you press
	the CH+ key the ONE FOR ALL will send out a POWER signal
	from the next code contained in the memory).
	You may have to press this key many times (up to 150
	times) so please be patient. If you skip past a code, you can
	go to the previous code(s) by pressing the CH- key. Remember
	to keep pointing the ONE FOR ALL at your Television while
	pressing this key.

6As soon as your television switches off, press MAGIC to store the code.

-To search for your Set-Top-Box, Digital Satellite, Cable Box, Freeview/DVB-T Box press 9 9 2 (instead of 9 9 1) during step 3.

-Most TV’s do not switch on pressing the POWER key. Please try pressing the “TV-text off” key to switch your TV back on.

-If you cannot control your Television properly, please continue the Search Method, you may be using the wrong Code.

6 WWW.ONEFORALL.COM