UNLOCKINGVOLUME CONTROL FOR A SINGLE
DEVICE(INDIVIDUAL VOLUME UNLOCK)
1. Press and hold SETUPuntil the two bottom
IRsegments flash twice. The Program Keys
will appear as SETUPflashes repeatedly.
2. Press VOL once.The Vo l u me Lock
programmingscreen will appear:
3. Press VOL▼once.Then press a device key
once (i.e.,AUX,CBL/SAT,CD,TV,DVD,AUDIO,
VCR,or PVR) where you want the volume
controls unlocked.The two bottom IR seg-
ments will flash twice and the Program Keys
will appear again.
NOTE:The programming mode is still active as
denoted by the flashing SETUPkey.If desired, use the
other Program Keys to continue programming (see
Table ofContents on page 2 for related sections).
4. Ifdesired,repeat steps 1 through 3 (of this
section) for each dev ice that you want volume
to be unlocked.
5. To exit programming,press HOMEonce. The
display will return to the last-selected device
menu screen.
6. Now,after you select a device that has
volume unlocked, pressing VOL ▲,VOL▼,or
MUTEwill control the device’s volume only in
its own mode.
UNLOCKINGALL VOLUME CONTROL
(RESTORING DEFAULTSETTING)1. Perform steps 1 and 2 ofthe previous section.
2. Press VOL ▲once.The two bottom IR seg-
ments will flash twice and the Program Keys
will appear again.
3. To exit programming,press HOMEonce. The
display will return to the last-selected device
menu screen.
4. Volume will again be independently con-
trolled according to its default states for all
programmed devices.
USER’SGUIDE
Changing Volume Lock 15
OFA Kameleon UG 5/8/03 3:22 PM Page 15