4. Press a device key once (i.e.,AUX,CBL/SAT,
CD,TV,DVD,AUDIO,VCR,or PVR).The selected
device key will animate.
NOTE:Please refer to the Device Table on page 7
when choosing a device key for programming.
5. Use the Manufacturer’s Codes(starting on
page24) to locate the type of dev ice and
brand name and then use the Number Keys
to enter the first four-digit code for your
device.If performed correctly,the bottom two
IRsegments will flash twice.
NOTE:If the bottom two IR segments displayed one
long flash instead,a mistake has occurred.Try
entering the same code again.
6. Aim the remote control at the device and
press POWERonce. The device should turn
off.If it does not, repeat steps 5 and 6, trying
each code for your brand until you find one
that works.Ifit still doesn’t work,try
Searching For Your Codeon page 11.
NOTE:Ifthe device does not have a POWERkey,
press the (Play) key.
7. Ifthe code works, press OK once.The two bot-
tom IRsegments will display one long flash.
8. Ifdesired,repeat steps 4 through 7 for each
device you want to control.If finished,press
HOMEtwice to exit programming and return
to the last-selected device menu screen.
9. For future reference,write down each
working device code in the following boxes:
AUXCode:
Device Type:_______________________
CBL/SATCode:
Device Type:_______________________
CDCode:
Device Type:_______________________
DVDCode:
Device Type:_______________________
TVCode:
DVDCode:
Device Type:_______________________
AUDIOCode:
Device Type:_______________________
VCRCode:
Device Type:_______________________
PVRCode:
USER’SGUIDE
Programming Device Control 9
OFA Kameleon UG 5/8/03 3:22 PM Page 9