1. Press and hold SETUPuntil the two bottom
IRsegments flash twice. The Program Keys
will appear as SETUPflashes repeatedly.
2. Press MACROonce. The Macro programming
screen will appear:
3. Press POWERonce.The last-selected
device menu screen,including HOME,
will be displayed.
4. Enter the macro sequence.For this example,
press CBL/SATonce, followed by POWER once.
Next,press DVDonce ,fo llowed by POWER
once.Then press AUDIO once , followed by
POWERonce. Finally, press TV once, followed
by POWERonce., and then the Home Theater
key once.
5. To save the power macro,press and hold
SETUP untilthe two bottom IR segments flash
twice.The Program Keys will appear again.
6. Exit programming by pressing HOMEonce.
The display will return to the last-selected
device menu screen.
7. To test the power macro,first make sure all
home theater devices selected in step 4 are
turned on.Aim the remote control at the
devices and press the Home Theaterkey once,
followed by POWER once.The devices should
turn offin this order: Satellite Receiver,DVD
Player,Audio Receiver,and TV.
To turn on the devices on again in the same
order as above,press POWERonce.
CLEARINGA MACRO
1. Press and hold SETUPuntil the two bottom
IRsegments flash twice. The Program Keys
will appear as SETUPflashes repeatedly.
2. Press MACROonce. The Macro programming
screen will appear:
3. Select the Macro Keyto b e cleared and press
it once.The last-selected device menu screen
will be displayed.
4. Press and hold SETUP untilthe two bottom IR
segments flash twice.The Program Keys will
appear again.
5. To exit programming,press HOMEonce. The
display will return to the last-selected device
menu screen.