One for All URC 4081, URC 4080 manual An Example Video Configuration, LED will blink twice

Models: URC 4081 URC 4080

1 19
Download 19 pages 55.84 Kb
Page 17
Image 17

USING THE VIDEO CONFIGURATION MODE

The One For All 4-Device Video Expert remote control includes a powerful Video Configuration feature that allows you to combine the most used functions of your Audio/Video equipment into one V.CONFIG mode. The features you can combine are organized into five groups and can be defined by specific modes as follows:

Function Groups

Function Group 1 – Transport Keys (Play, Stop, Fast Forward, Rewind, Pause, Record, Forward Scan, and Rewind Scan)

Function Group 2 – Volume Keys (Volume Up,Volume Down, and Mute)

Function Group 3 – Channel Keys (Channel Up, Channel Down, Digits 0-9, Enter, Previous Channel, Sleep, and Display)

Function Group 4 – Menu Keys (Menu, Up, Down, Left, Right, and Select)

Function Group 5 – PIP Keys (Picture-In-Picture, Swap, and Move)

Component (Mode) Groups

Component Group 1 – VCR and DVD

Component Group 2 – TV,VCR, and Cable/Sat

Component Group 3 – TV,VCR, and Cable/Sat

Component Group 4 – TV,VCR, Cable/Sat, and DVD

Component Group 5 – TV,VCR, and Cable/Sat

To enable the Video Configuration feature, you’ll need to perform the following programming sequence:

1. On the remote control, press V.CONFIG once.

2. Press and hold SET until the LED blinks twice, then release SET.

3. Enter 9 - 7 - 9. The LED will blink twice.

At this point, you’ll assign Component Groups to Function Groups up to five times, depending on how many combi- nations you need.You can perform any of the following steps in any order, as long as you finish the sequence with step 9.

4. Select a key from Component Group 1 (i.e., VCR or DVD) and press it once. Press PLAY to assign Function Group 1 (i.e., the transport keys). The

LED will blink twice.

5. Select a key from Component Group 2 (i.e., TV, VCR, or CBL/SAT) and press it once. Press VOL+

to assign Function Group 2 (i.e., the volume keys). The LED will blink twice.

6. Select a key from Component Group 3 (i.e., TV, VCR, or CBL/SAT) and press it once. Press CH+ to assign Function Group 3 (i.e., the channel keys). The LED will blink twice.

7. Select a key from Component Group 4 (i.e., TV, DVD, VCR, or CBL/SAT) and press it once. Press MENU to assign Function Group 4 (i.e., the menu keys). The LED will blink twice.

8. Select a key from Component Mode Group 5 (i.e., TV, VCR, or CBL/SAT) and press it once. Press PIP to assign Function Group 5 (i.e., the PIP keys). The LED will blink twice.

9. To lock in the Video Configuration, press SET until the LED blinks twice, then release SET.

An Example Video Configuration

From one mode, you would like to play your DVD, use the Volume control on the TV, change channels on your Cable Box, control the Menu on the Cable Box, and use the PIP feature of your TV. To program this Video Configuration you would perform the following steps:

1. On the remote control, press V.CONFIG once.

2. Press and hold SET until the LED blinks twice, then release SET.

3. Enter 9 - 7 - 9. The LED will blink twice.

4. Press DVD once and then press PLAY. The LED will blink twice.

...continued on next page

32

33

Page 17
Image 17
One for All URC 4081, URC 4080 manual An Example Video Configuration, LED will blink twice