X. Directions for Cleaning External Filter
All steps should be done with a dust mask and eye protection.
The External Filter can be cleaned using the following methods:
1. Compressed air from outside.
Blast air along pleats of the filter at about a 20
angle. Blast air out and away from you or anyone in the general area.
Keep air nozzle at least 6” from filter. Closer blasts may6” damage filter material.
2. Empty Dust Bin.
Wait a few minutes for internal dust to settle then unclip and carefully empty dust bin.
3. Rinse with water. (Optional)
Keep nozzle at least 6” from filter and keep your pressure down. Closer blasts may damage filter material. Rinse off INSIDE of filter. Let filter dry completely before reuse or keep a spare filter on hand.
Clipping Filter Dust Pan
Position bottom of “U” on top of clip between filter pleats, then push bottom of clip underneath the rim of the dust pan. Space the three clips equally around the dust pan, making sure the pan is even with filter bottom and tightly sealed.
Bottom of “U”
Side view of clip
11
2HP Super Dust Gorilla Owner’s Manual c O.A.S. 2007
