Onkyo Enjoying Audio Sources, Turning on the A-1VL, Playing a Connected Component

Enjoying Audio Sources

Turning on the A-1VL

POWER

POWER indicator

Tips on sound quality

Press the [POWER] button to turn on the A-1VL.

The POWER indicator lights up.

Note:

It takes about five seconds for the elec- tric circuit to be stable. During this time the A-1VL does not output an audio signal.

You will get better sound quality 10 to 30 minutes after you turn on the A-1VL. To avoid degrading the sound quality, do not tie audio RCA/phono cables and speaker cables together in a bundle.

When placing the A-1VL, avoid a place where it is susceptible to vibrations.

Playing a Connected Component

MUTING

13

MUTING indicator

VOLUME

1

2

Select the component you want to play.

Turn the Input selector control to select the component you want to play.

CD: Select to play the audio signal from the component connected to the CD terminal.

TUNER: Select to play the audio signal from the component connected to the TUNER terminal.

LINE 1: Select to play the audio signal from the component connected to the LINE 1 terminal.

LINE 2: Select to play the audio signal from the component connected to the LINE 2 terminal.

PHONO: Select to play the audio signal from the component connected to the PHONO terminal.

Start playback on the selected audio component.

3 A-1VL	To adjust the volume, use the VOLUME control, or the remote controller’s [VOLUME]
	button.
	Muting the A-1VL (remote controller only)
Remote
	With this function you can temporarily mute the output of the A-1VL.
controller
	Press the remote controller’s [MUTING] button.
	The output is muted and the MUTING indicator flashes on the A-1VL.
	To unmute the A-1VL, press the remote controller’s [MUTING] button again.
	Note:
	The Mute function is cancelled when the A-1VL is set to Off.

12