Connecting a Power Amplifier
You can use the A-1VL as a preamplifier by connecting the A-1VL to a power amplifier.
When you use the A-1VL as a preamplifer, connect the main in terminals on the power amplifier to the PRE- OUT terminals on the A-1VL.
PREOUT
L
LINE IN
L
R
Note:
The signal from the PREOUT terminal will be output whether the DIRECT function is enabled or not.
Connecting a Preamp
You can use the A-1VL as a power amplifier by connecting the A-1VL to a preamplifier.
When you use the A-1VL as a power amplifier, connect the pre out terminals on the preamplifier to the MAIN IN terminals on the A-1VL.
You can enjoy surround sound playback by connecting front left and right speakers to the A-1VL and connect- ing center and surround speakers to the preamplifier. If you have a powered subwoofer, connect it to the preamplifier’s PRE OUT.
MAIN IN
L
R
PRE OUT
L
R
Note:
Before you use the A-1VL as a power amplifier, be sure to turn on the DIRECT function by pressing the DIRECT button. (page 13)
Connecting the Power Cord
Notes:
•Before connecting the power cord, connect all of your speakers and audio components.
•Turning on the A-1VL may cause a momentary power surge that might interfere with other electrical equipment on the same circuit. If this is a problem, plug the A-1VL into a different circuit.
•Do not use a power cord other than the one supplied with the A-1VL. The supplied power cord is designed exclusively for use with the A-1VL and should not be used with any other equipment.
•Never disconnect the power cord from the A-1VL while the other end is still plugged into a wall outlet. Doing so may cause an electric shock. Always disconnect the power cord from the wall outlet first, and then the A-1VL.
1.Connect the supplied power cord to the A-1VL’s AC INLET.
2.Plug the power cord into an AC wall outlet.
AC INLET
To AC wall outlet