Onkyo C-701A Connecting to the other components, Connecting the, connector, Before connecting

Connecting to the other components

Connecting the connector Connecting the power cord

If you are using other ONKYO components equipped

with connectors, you can control these com- ponents using the amplifier‘s remote controller.

Before connecting

•The amplifier must be connected in the

system hookups for control operations.

•Each component has two connectors. There is no difference between those connectors.

•The components may be connected in any order.

•Remote control operation is not possible if only

the remote control cable is connected to

the connectors. Connect the audio connec- tion cables correctly.

The illustration below is the hookup example. With these hookups, you can operate the CD Syn- chro Recording (see “CD/MD/CDR synchro record- ing” on page 8).

Tuner Amplifier

MD recorder	cable
C-701A	Supplied
	cable
	REMOTE
	CONTROL

Insert the AC power cord into a wall outlet. The STANDBY indicator lights.

To wall outlet

STANDBY/ ON

STANDBY

Light

•To use the unit with the other Onkyo Sepa- rate Collection series components, follow the connection diagram in the R-801A instruc- tion manual to connect the unit to the sys- tem.

•If you press the (OPEN/CLOSE) button while the unit is in the STANDBY mode, the power will turn on and the display will light up auto- matically.

Note

An remote control cable equipped with a 1/

8in. (3.5mm) diameter miniature two-conductor

phone plug is included with this unit and with ev- ery tuner and cassette deck that bears the mark.

12