Connecting to Other Devices—Continued
COAXIAL
Connect the component using a commercial coaxial digital cable.
Connecting to Capable
Components
You can control audiovisual amplifiers and receivers using the supplied remote controller by connecting Onkyo audiovisual amps and receivers with jacks. Use a cable to connect the unit's terminal with the amp or receiver's terminal.
Use the supplied audio cable to connect the unit's AUDIO OUTPUT ANALOG terminal with the amp or receiver's analog audio in terminal.
!Caution
Be sure to connect the audio cables as well. The amp or receiver cannot be controlled by the remote controller when only the cable and optical digital cable are connected.
CD
Notes
-See the manual of each component for information about available system features.
-Use the terminal with products equipped with an jack.
-If there are two jacks, they both operate identically. Connect to either one of them.
15