Troubleshooting—Continued
Playing Music CDs with Copy Control Functions
Problem | Solution | See Page | |
|
|
| |
There is noise during playback, or the audio | You are playing back a music CD with a copy control function. Some music CDs | - | |
skips | with copy control functions do not meet CD standards. Since these are special |
| |
| discs, this unit may not be able to play them. |
| |
The disc is not recognized, and "NoDISC" |
| ||
|
| ||
appears in the display |
|
| |
|
|
| |
The first track is not played |
|
| |
|
|
| |
It takes longer than usual to go to the start of a |
|
| |
track |
|
| |
|
|
| |
Tracks start playing in the middle |
|
| |
|
|
| |
Some locations can not be played back |
|
| |
|
|
| |
Playback stops partway through |
|
| |
|
|
| |
The display is wrong |
|
| |
|
|
| |
Audio |
|
| |
|
|
| |
|
|
| |
|
|
| |
Problem | Solution | See Page | |
|
|
| |
No audio is output for the disc being played | Make sure that the cables are plugged in all the way. | 14 | |
(both analog and digital connections) |
|
| |
Make sure that the connected component's input terminal and the input settings | - | ||
| |||
| are correct. |
| |
|
|
| |
| Make sure that the amp's volume isn't set to the lowest level, and that the volume | - | |
| isn't muted. |
| |
|
|
| |
| If headphones are plugged into the player, adjust the headphone volume using | - | |
| the PHONES LEVEL control on the unit. |
| |
|
|
| |
No audio is output for the disc being played | Make sure the Digital Out button isn't set to "off." When making a digital | 17 | |
(digital connection) | connection, set the Digital Out button to "on." |
| |
|
|
| |
I hear noise in the audio | The unit may be picking up interference from another digital component. Turn | - | |
| off the power of peripheral devices, and check for the source of the noise. After |
| |
| doing so, move components causing noise away from the unit. |
| |
|
|
| |
The audio playback quality of Super Audio | The sound quality may suffer if you play back a Super Audio CD with DIGITAL | 17 | |
CDs is poor. | OUT on. You should normally keep it off. |
| |
|
|
| |
Remote Controller |
|
| |
|
|
| |
|
|
| |
|
|
| |
Problem | Solution | See Page | |
|
|
| |
The buttons on the CD player work, but the | Install two new batteries. | 6 | |
buttons on the remote controller do not |
|
| |
Make sure that the remote controller is not too far away from the unit, and that | 11 | ||
| |||
| there is no obstruction between the unit and the remote controller. |
| |
|
|
| |
| Make sure that the unit's remote control sensor is not exposed to bright light | 11 | |
| (inverted fluorescent light or direct sunlight). |
| |
|
|
| |
| Make sure that the audio rack does not have colored or tinted glass. This could | 11 | |
| prevent the remote controller from functioning properly. |
| |
|
|
| |
The AV receiver volume and muting controls | Change the ID of the AV receiver to 2. | - | |
do not work |
|
| |
|
|
|
31
