Onkyo CR-505DAB instruction manual Setting the Clock Manually, Displaying the Date & Time

The day of the week flashes.

Powering Up and Setting the Clock—Continued

STANDBY/ON		CLOCK	CLOCK CALL
		CALL
2	3		TIMER
1		TIMER
5	6
4
8	9
7
--/--- CLEAR			ENTER
10/0		ENTER
DISPLAY	MODE
SLEEP		REPEAT
MUTING		INPUT

DAB FM AM DIRECT

CD

MD

Setting the Clock Manually

If you cannot set the clock by using the ACCUCLOCK function, you can set it manually. In this case, the ACCUCLOCK function will not automatically cali- brate the clock each day.

1 Press the [TIMER] button repeatedly until “Clock” appears.

5 Press the [ENTER] button.

The time flashes.

6 Use the Up/Down []/[ ] buttons to set the time.

7 Press the [ENTER] button to set the clock.

“Adjusted” appears on the display.

Displaying the Date & Time

1 Press the [CLOCK CALL] button.

The date and time appear on the display.

Press the [CLOCK CALL] button again to return to the previous display.

VOLUME

MIN MAX

STANDBY / ON PHONES INPUT MENU DIRECT BASS TREBLE PRESET

PUSH TO ENTER

2 Press the [ENTER] button and use the Up/ Down []/[ ] buttons to select “Manual Adjust.”

3 Press the [ENTER] button.

4 Use the Up/Down []/[ ] buttons to select a day.

STANDBY/ON

Displaying the Time in Standby Mode

You can set the CR-505DAB so that the time is displayed while the CR-505DAB is in Standby mode.

1 With the CR-505DAB turned on, press and hold the CR-505DAB’s [STANDBY/ON] but- ton for more than 2 seconds.

To turn off the time display, repeat this procedure.

Note:

Setting the CR-505DAB to display the time will slightly increase the power consumption in Standby mode.

18