Onkyo CR-515 CR-315 Connecting an Onkyo CD Recorder CR-515, Connecting a Portable Audio Device

Connecting Other Components—Continued

Connecting an Onkyo CD Recorder (CR-515)

The following diagram shows how to connect an optional Onkyo CD recorder.

Connect the CD receiver’s DOCK/CDR OUT jacks to the CD recorder’s INPUT (REC) jacks, and connect the CD receiver’s DOCK/CDR IN jacks to the CD recorder’s OUTPUT (PLAY) jacks.

CR-515’s rear panel	Onkyo CD recorder’s
		rear panel
LINE 1	INPUT	OUTPUT
I N
	(REC)	(PLAY) REMOTE
		CONTROL

Analog audio cable (RCA)

OUT

MD/

TAPE

Red

I N

OUTWhite

DOCK/
CDR	White
I N
R	L

L

R

White Red Red White

Red

cable supplied with

						the Onkyo CD recorder
			: Signal flow
What can you do with				?
•	Connecting an Onkyo CD recorder to the CD receiver with an							cable allows you to control the CD recorder with
	the CD receiver’s remote controller. In addition, when playback is started on the CD recorder, the CD receiver will
	automatically select it as the input source.
•	To use		, you must connect the Onkyo CD recorder to the CD receiver with an						cable and an analog audio cable
	(RCA). In addition, the Input Display for the DOCK/CDR jacks must be set to “CDR” (see page 29).
•	Some	-capable components have two					jacks. They’re both the same, so you can use either one. The extra jack
	is for connecting additional				-capable components.

Connecting a Portable Audio Device

The following diagram shows how to connect a portable audio device (e.g., MP3 player, MD player, CD player). Connect the CD receiver’s LINE 2 IN jack (LINE IN jack on the CR-315) on the front panel to the portable audio device’s output jack.

Depending on the type of output jack on the portable audio device, you may need to buy a suitable cable. The CD receiver’s LINE 2 IN jack (LINE IN jack on the CR-315) accepts a stereo miniplug.

CR-515’s front panel Portable audio device’s output jack

Stereo miniplug cable

: Signal flow

Notes:

•Use a connecting cable that doesn’t have any attenuation resistors in it.

•If you connect a portable audio device’s headphone output to the CD receiver’s LINE2 IN jack (LINE IN jack on the CR-315), turn down the volume on the portable audio device before you connect it.

•When you connect a portable audio device to the CD receiver, make sure you connect it to the LINE 2 IN jack (LINE IN jack on the CR-315) and not the adjacent PHONES jack. If you connect to the PHONES jack by mistake, it may cause the PHONES output to malfunction.

23