Onkyo CR-515 CR-315 instruction manual Changing the Input Display, Input Source Name Abbreviations

Basic Operation—Continued

Changing the Input Display

You can choose what name is displayed when an input source is selected so that it matches the type of component that

you’ve connected to the MD/TAPE IN, DOCK/CDR IN, or DIGITAL IN. When you connect an Onkyo -capable

component, it’s important that you select the input source name that matches the type of component for to work properly.

INPUT

/

MENU/NO/

CLEAR

YES/MODE /

ENTER

1	Use the INPUT [ ]/[ ] buttons
	to select the input source whose
	name you want to change.
	CR-515: TAPE, DOCK, DIGITAL*
	(*Asian model only)
	CR-315: TAPE
2	Press and hold the
	[MENU/NO/CLEAR] button until
	“Name Select?” flashes on the
	display, and then press [ENTER].

Depending on the input source selected in step 1, the input source names are selected in the following orders:

TAPE		MD			VIDEO
		DAT
DOCK					CD-R
		PC
DIGITAL				CD-R/dig
	GAME/dig		PC/dig

4	Press [ENTER] to confirm your
	selection.
	“Complete” appears on the display.

On the CR-515, you can also use the front panel con- trols.

1Use the [INPUT] button to select the input source whose name you want to change.

2Push the multi control to select “Name Select?,” and then push it again.

3Turn the multi control to select the new input source name.

4Push the multi control to confirm your selection.

3	Use the Previous or Next
	[	]/[	] button to select the
	new input source name.

Input Source Name Abbreviations

Sometimes the input source name may be displayed as a 2-letter abbreviation, as per the following table.

Full name	Abbreviation
CDR	CR
DAT	DT
DIGITAL	DG
GAME	GM
DOCK	DC
LINE	LI
LINE1	L1
LINE2	L2
MD	MD
PC	PC
TAPE	TP
VIDEO	VD

29