Onkyo instruction manual Connecting the DX-7355-Continued, Connections

Connecting the DX-7355—Continued

Connections

With (Remote Interactive) you can control the

DX-7355 together with your other -compatible Onkyo AV components. With some Onkyo AV receivers you can use one remote controller to control all your Onkyo components and use the following special functions:

Direct Change

If your DX-7355 is connected to an -compatible Onkyo hi-fi amp or AV receiver, when you start playback on the DX-7355, the AV receiver will select the DX-7355 as the input source.

Remote Control Operation

You can control the DX-7355 by using your Onkyo amplifier’s remote controller. See the amplifier’s instruc- tion manual for details.

To use the	functions, you need to connect one of the
DX-7355’s	connectors to an	connector on

another AV component in your system by using the sup-

plied	cable.
See the manuals supplied with your other		-compati-
ble AV components for more information.

Notes:

•Use only cables for connections.

•To use you must make an analog RCA/phono connection between your DX-7355 and Onkyo AV receiver even if they are connected digitally.

•The DX-7355 has two connectors. You can con- nect either one to your Onkyo hi-fi amp or AV receiver. The other connector is for connecting addi-

tional -compatible components.

•Connect the DX-7355’s connector to only Onkyo AV components. Connecting to other manufacturer’s AV components may cause them to malfunction.

•Some Onkyo -compatible AV components may not support the special functions described here.

To use you must make an analog audio connection (RCA/phono) between the DX-7355 and your other Onkyo equipment even if they are connected digitally.

Disconnect the power

cord before making any

connections!

Coaxial cable (not supplied)

cable

RCA/phono audio cable

L R

CD Coaxial IN

Hi-fi amp, AV receiver

14