Before Using the DX-7355
•Turn off the power before changing the switch set- tings.
•On changing the switch settings,
Setting the Voltage Selector (Worldwide models only)
Worldwide models are equipped with a voltage selector to conform with local power supplies. Be sure to set this switch to match the voltage of the power supply in your area before plugging in the unit.
Determine the proper voltage for your area:
If the preset voltage is not correct for your area, insert a screwdriver into the groove in the switch. Slide the switch all the way to the right (120 V) or to the left
Turning On the DX-7355
POWER
To wall outlet
1
2
Plug the power cord into a suit- able wall outlet.
Press the DX-7355’s [POWER] switch.
Make sure the switch is set to ON . The
To Turn off the DX-7355
Press the [POWER] switch.
Make sure the switch is set to OFF .
15