Playing CDs—Continued
Using the Remote Controller
Use the number buttons as shown in the examples below to select tracks.
To select: Press:
Track #8
Track #10
Track #34
Used to enter numbers over 10.
Used to enter number 10 or 0.
For MP3 CDs, you can select tracks in the current group with these buttons.
Press to pause playback.
To resume playback, press the Pause [ 
] or Play [ 
] button.
Press to
During playback or while playback is paused, hold down the Fast Forward
[
] button to
Reverse [
] button to
Press to open and close the disc tray.
Press to adjust the display brightness.
By pressing this button, the brightness changes in order of “Normal”, “Dim”, and “Dimmer”.
Press to display more CD infor- mation.
Press to start playback.
Press to stop playback.
Press to select tracks.
•Press the Previous [
] button to locate the beginning of the currently playing or paused track. Press it repeatedly to select earlier tracks.
•Press the Next [
] button repeat- edly to select subsequent tracks.
For MP3 CDs, you can select tracks in other groups (see page 18).
Displaying CD Information
Press the
While playback is stopped
TRACKTOTAL REMAIN
Total number | Total playing time |
of tracks | (DISC TOTAL |
| REMAIN) |
During playback or while playback is paused
Elapsed track time: The length of time that the current track has been playing (default display).
TRACK
Remaining track time: The amount of time remaining for the current track (REMAIN indicator appears).
TRACK | REMAIN |
Remaining disc time: The amount of time remaining for the entire disc (TOTAL and REMAIN indicators appear).
TRACK | TOTAL REMAIN |
Note:
See page 20 for details on displaying MP3 information.
17
