Playing a source

1

4

AV SURROUND PROCESSOR

1

MASTER VOLUME

POWER SLEEP LINE-1 LINE-2

TUNER

PRESET FM AM

DVD

MD

TAPE

EFFECTMODE

STANDBY/ON

STANDBY

POWER

MULTI CH INPUT LINE VIDEO-1/2

2

ON OFF

ED-205

2

 

 

 

DISC

 

CD

 

 

EFFECT

MULTI CH

LINE

VIDEO

MODE

CH SEL

 

LEVEL

DELAY

TEST

 

 

TIME

TONE

VOLUME

CENTER

MUTING

 

 

MODE

 

 

RC-394S

REMOTE CONTROLLER

512

4

 

(Front panel)

(Remote controller)

1

STANDBY/ON

POWER

 

 

2

MULTI CH INPUT

MULTI CH

 

4

MASTER VOLUME

VOLUME

 

 

 

51

CH SEL

LEVEL

2

CH SEL

LEVEL

 

Playing a multi-channel input source

The following describes how to play a multi-channel input source. A multi channel input source refers to equipment with 5.1-channel output jacks (such as a DVD player). When connected to the ED-205, the equipment outputs separate signals to the 5 speaker channels (Left/Right front, Center, and Left/ Right Surround). The ED-205 then outputs the signal for the subwoofer channel to its SUBWOOFER PRE OUT jack. In the Multi-channel input mode, you cannot use the surround modes. For how to connect a multi-channel input source, see page 7.

Before playing a multi-channel input source

•The ED-205 stores the output level you set for each speaker connected to the MULTI CHANNEL INPUT jack. This stored setting has no effect on the DOLBY PRO LOGIC output levels you set using- the test tone.

1.Press the POWER button.

The STANDBY indicator goes out and the display lights up.

2.Press the MULTI-CH INPUT button.

3.Play the input source connected to the MULTI CHANNEL INPUT jacks.

4.Adjust the sound volume.

The sound volume for all speakers simultaneously changes. Adjust the sound volume from the listening position using the remote controller.

5.Adjust the output level of each speaker according to your taste.

The output levels for the Center speaker (CENTER), Right Surround speaker (R-SUR), Left Surround speaker (L-SUR), and Subwoofer (SW) can be adjusted.

1Select the speaker channel to adjust by using the CH SEL button on the remote controller.

2Adjust the output level using the LEVEL y/u buttons.

The adjustment range for the Center, and Left/Right Surround speakers is -12dB to +12dB. For the Subwoofer, it is -30 to +12dB.

16